Super Cyclone Coaster

General Tips

• Orientation of parts - Be sure to check and re-check orientation of blue and gray connectors. If you are unclear of the orientation on one page, go to next page to see what hooks into the pieces in question - this will help you place them correctly.
• Track pieces - Connectors should attach to the track pieces with a firm snap. This will happen each time if you are sure to have each track piece oriented as the page clearly shows before attaching the connectors. If your track pieces keep popping off after you have attached them to the main structure, it is likely you have not "snapped" the connectors onto the correct side of the track.
• Chain - Your chain may occasionally get caught on the black Chain Guides. When this happens the chain will stop moving and you will hear the motor clicking. Simply re-position the Chain between the Guides to stop the problem.  Also, be sure to count and make sure you have the appropriate number of chain links put together.  You may actually get a piece or two more included in the bag than what is called for in the instructions!

Specific Building Help

• Page 7, Step 3 - the yellow piece holding the spacers in place is actually two pieces - a yellow connector (there are 41 of them in the set) and a yellow rod (there are 29 in the set) facing away from you.  It is an optical illusion that they look like one piece.  There is a similar connection shown on Page 8 under Step 4 as well.

Need more help?
Browse the Help Center here on this web site, and if you don't find the information you need, send us your comment or question online, or call us at 1-800-KID-KNEX.