Close
Search
Filters

Angry Birds™ Tips

If you are unable to get bricks to stay together when building:

  • As you stack the bricks, be sure all connections are firm. If you are building on top of the flat tiles try building the brick sections first and then carefully place the structures on the flat tiles. Remember that the bricks need to be able to topple when you launch a bird and the flat tiles allow this to happen.
  • Be sure to build sections separately on the table or in your hand before assembling to the build. This will eliminate the pressure on the build.
  • When you start building be sure you have enough room to set the launcher away from the structure to launch the birds. It is difficult to move the built structure without having pieces fall if you haven't provided the room for the launching of the birds ahead of time.

If you can't get birds to launch:

  • Be sure the bird is firmly seated upright in the launcher (with the launcher in an upright position you should see the top of the bird as you look straight down). The tabs on the brown launch arms should be fitted into the slots on the back of the bird. Secure the base with one hand and place your thumb and fore finger (or first knuckle) on the launch tabs. Snap them together quickly and firmly -- much like if you were snapping your fingers.
  • You can adjust the position of the launcher to change the direction the bird will fly. If you are close to your structure move the launcher to an upright position before launching the bird. If you are farther away position the launcher at more of a diagonal to send the bird in an arc. Practice with the launcher in various positions to see which one works best for you. Note that positioning the launcher flat over the base with the bird facing straight up will probably result in an unsuccessful launch.

Angry Birds Space Crater Crash - General Tips

  • When placing the 1x1 tile pieces on the build make sure they are placed on straight.  Even the slightest angle will cause difficulties with building.
  • If you are still have trouble with the 1x1 tiles (aka the break-away points), you can always remove them completely from the structures and just place the bricks on top of each other.  This will eliminate the break-away points but you will still be able to enjoy the set.
  • When attaching each section to the overall structure, be sure to hold the model securely and place the pieces on carefully.

Angry Birds Hammin' Around - General Tips

  • Step 12- Orange Rod adapter should be connecting through the 5th hole on the yellow brick and not the 4th hole as it shown on the instructions.

Angry Birds Ice Bird Breakdown - General Tips

  • When placing the 1x1 tile pieces on the build make sure they are placed on straight.  Even the slightest angle will cause difficulties with building.
  • If you are still have trouble building with the 1x1 tiles (aka the break-away points), you can always remove them completely from the structures and just place the bricks on top of each other.  This will eliminate the break-away points but you will still be able to enjoy the set.
  • When attaching each section to the overall structure, be sure to hold the model securely and place the pieces on carefully.

Angry Birds Mission May'Ham - General Tips

  • Step 2 - Soft black "skid pins" go into middle square holes on red connectors NOT round hole.  Launcher mount fits into the yellow connector exactly the same way a rod would fit in the same connector - lay the Launcher mount on top of the opening next the opening in the yellow connector and press it into place.
  • Steps 1-3 - If the TNT blocks are shifting while you are building (Steps 1 - 3), you can remove the green tile pieces and 1 x 2 green bricks and place the TNT blocks directly on the base.  Assemble the structures that snap together separately and then, while holding the base firmly in place attach them to the base.  Examples - Steps 4 and 5; the 2 parts of Step 6; and Steps 7 through 12.
  • Step 4 - Use 1x2 gray bricks with holes in this step - red arrows hide holes.  Take moveable pieces off to assemble structure.
  • Step 12 - Orange Adapter Rods connect into 2nd holes on gray bricks

Angry Birds Party Smashers - General Tips


To launch bird, place bird in cradle, hold brown base firmly and hit green rod in front of base.